REQUIREMENTS FOR SAFE OPERATION OF THE

LASER CUTTING AND ENGRAVING EQUIPMENT

Failure to comply with any and or all of these safety rules will result in immediate dismissal from the lab.

A. Safety glasses must be worn at all times when in the area of the laser system. This includes when the machines are “on” and “off.”

2. The laser system is not to be operated without a T.A. or AML supervisor in the immediate area. Each student is responsible for fully understanding the operational procedures associated with the system.

C. Do not operate or put the system on-line without first following proper start-up procedures as outlined in the AML manual.

D. Before printing a CAD file make sure no objects are in the working area of the laser system’s head.

E. Do not attempt to change any of the system settings or mechanical components without the supervision or permission of AML staff.

F. Report ALL system problems to AML staff immediately.

G. Avoid placing eyes in the red beam path.

H. Do not attempt to modify or disassemble the laser system at any time.

I. Wear appropriate safety goggles especially when engraving with mirrors or coated metals such as enameled brass and anodized aluminum.

J. Invisible intensive laser radiation may cause physical burns or severe eye damage. Always read the manual and caution labels carefully before operation.

K. Do not work with materials that may produce toxic substances such as PVC and Teflon.

L. When cutting materials that easily catch on fire, such as acrylic, wood or paper, it is advised to have the air compressor turned on to prevent flame.

M. Do not attempt to modify or disassemble the laser system at any time.

N. Never leave the machine unattended during operation.

.

If you do not know how to operate the laser system or do not fully understand the instructions you have been given, ask a supervisor until you are certain about what is required. IF YOU DON’T KNOW, ASK!

In signing this statement, I acknowledge that I have carefully read and fully understand the serious nature of working with the laser system. I also realize that other, undefined hazards will always exist in the manufacturing environment therefore, MY OWN SAFETY IS ULTIMATELY MY OWN RESPONSIBILITY. I will always “ask” if I am not sure of a potential safety hazard.

Print Name: __________________________________ Student I.D. #: ___________

Signature: ____________________________________ Date: / /____